Frequently Asked Questions

Click here to see compatible PDA connectors with PP-55 printer.

PrintUtility is a Windows Mobile driver software package that allows you to print the different document formats on Windows Mobile device using the PP55 thermal printer. PrintUtility is package consist of printer driver, configuration tool (PrintConfig) and demonstration application (PrintDemo).

Click here to Download

To install PrintUtility on PDA you need Windows Desktop System (Windows 2000, Windows XP, Windows 2003) and Microsoft ActiveSync installed and the PDA attached to desktop. After installing the PrintUtility application onto your desktop, you must go to: Start->Settings->System->PrintConfig and chouse the right settings. All settings are explained into documentation.
Note: If you use RS232 connection with printer, the IrDA port should be disabled using the following: Uncheck the “Receive all incoming beams” option which can be found under - Start->Settings->Connections->Beem->Receive all incoming beams.

To reset your phone

1. Tap Start > Settings > System tab > Default Settings.
2. Key in "1234" to confirm that you want to restore default settings and press OK.
3. Tap OK.
The phone will restart automatically after it is reset.

 

 

 

 

 

 

Hard reset

HP iPAQ Setup Assistant
Use HP iPAQ Setup Assistant to simplify configuring settings on your HP iPAQ.
HP iPAQ Setup Assistant lets you save the settings on your computer. This can help you restore configuration settings on your HP iPAQ at any time. HP iPAQ Setup Assistant also allows you to perform
a factory reset on your HP iPAQ and view detailed product information.

To hard reset HP iPAQ 112:
- press and hold the 3 buttons Windows, OK and REC
- press the reset button (4) for about 3-4 seconds and release it
- release the 3 buttons

 

 

 

 

 

 

 

 

 

 

 

Follow these steps to perform a factory reset of the device.Press and hold the Record , Windows , OK , and Reset  buttons at the same time.
Figure 1: Buttons used to perform factory reset

1.   1 - Record
2 - Windows
3 - OK
4 - Reset

2.Hold all the buttons for 2 seconds.

3.Release the Reset button while continuing to hold the Record , Windows , and OK buttons.

4. A Clean Boot message is displayed, indicating successful restoration of factory settings on your device.